Sales:,   Support:
Sales: +919050603959,   Support: +917015039594

Burettes & Pippettes

Burettes & Pippettes:

Burettes TPX

This Burette has a transparent acrylic pipe and a leak proof TPX stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric acide & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5%wt/wt of acids or 30% bases.

Particulars Packing
25 ML 10 Pcs
100 ML 10 Pcs

Microtip Box

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box.

Code Particulars Packing
67011 For 96 Micro Tips of 2-10 µl 6 Pcs
67012 For 96 Micro Tips of 2-200 µl 6 Pcs
67013L For 100 Micro Tips of 200-1000 µl 6 Pcs

Pipette Pump

A fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

Material: Acrylonitrile Butadeine styrene
Particulars Packing
2 12 Pcs
10 12 Pcs
25 12 Pcs

Pipette Stand-94 pipettes,Rotary

Moulded in polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Pipette Stand-Horizontal

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

Pipette Stand-Vertical

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top discs that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the dissc should be kept parallel to ensure that corresponding holes are being centered

Reagent Reservior

Moulded in polypropylene, this autoclavable reagent reservoir is helpful for multi-channel pipettes to be used into microtiter plates.

Particulars Packing
75Ml 12 Pcs

Universal Reagent Reservoir

This Universal Reagent Reservoir has a graduated single reagent reservoir with maximum volume of 50 ml, reservoir with 8 seprate numbered 5ml reagent channels & a reservoir with 12 separate numbered 5ml. reagent channels. Made of polypropylene this reagent reservoir are repeatedly autoclavable and can be used with all multi-channel pipettes.

Particulars Packing
50Ml 6 Pcs

Pipette Box

Made of polypropylene, this pipette box is designed is such a way that it can hold pipettes of different lengths. The top of the box screws on the bottom and the height can adjusted by screwing or unscrewing the top. Particulars Packing Pipette Box 4 Pcs