Sales: sales@chemlabequipments.com,  
Sales: +919050603959,   U.S. Sales: +13124784806

Fume Hood

Fume Hood :

Fume Hood Designed to function as an enclosed vantilated workshop-can provide a substantial degree of protection for the experimenter.
It is designed to so as to throw out all toxic harmful vapours, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area , thus protecting. costly instruments and the person working in the lab.

SALIENT FEATURES & CONSTRUCTION :


  • Low Cost & User Friendly Economic Design
  • Generate a negative pressue inside the hood thus facilitating removal of all contaminants from the working area, into the atmosphere.
  • Basic material is thick board wood front back top and exterior surfaces are covered with fromica. OR Cold rolled steel duly powder coated OR Stainless Steel (55-304) (as ordered).
  • All interior surfaces are sealed and checked for leakage
  • Working table is made of Stainless Steel Sheet (SS-304 grade) and is fitted with a small S.S. Sink with water tap connections
  • wroking area is illuminated by fluroscent lighting fitted to the unit.
  • The front doors moves vertically UP and down with concealed counter balanced weight.
  • The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. ,capacity operates with minimum noise level
  • Hieght of the working table provide comfortable "SIT DOWN" working position for the operator
  • The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluroscent light

Technical Data

Model No. FH-1 FH-2 FH-3 FH-4
Working Table Size 2' x 2' 3' x 2' 4' x 2' 6' x 2'
Working Size 2' x 2' x 2' 3' x 2' x 2' 4' x 2' x 2' 6' x 2' x 2'
No. of Motor /Blower 1 1 1 1
No. of Motor /Blower 1 x 20watt 1 x 20watt 2 x 40watt 2 x 40watt
Illumination 1 x 40watt 1 x 40watt 1 x 40watt 1 x 40watt
Working Table Top Fitted with acid/ alkali resistant tile and SS sink fitted with swan type water tap
Front Door Moves vertically up and down with concealed counter balanced weight/ by hinges
Standard Acessory Gas/Air cock fitted with 15/5 amp sockets with switches
Electric Supply AC 230V,50/60Hz

Optional Features:

PVC Fume Duct Available at extra cost per running feet
Storage Compartments Mounting Base Below the work table with storage drawers and door to cost extra
SS Lining on working walls Can be done at an extra cost
FRP Lining on working walls Can be done at an extra cost
Lead Lining on working walls for use as radio-isotope fume hood
Duct less fume hood are also available