Sales: sales@chemlabequipments.com,  
Sales: +919050603959,   U.S. Sales: +13124784806

Metalware

Metalware:

Boss Head-Aluminium

Aluminium die casted, holds rods at right angle with plastic head thumbscrews can take rods up to 16 mm dia.

Boss Head-Die Cast Alloy

For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods up to 16mm in diameter at a right angle to one another. Metal thumbscrews allow for adjustment.

Boss Head-Double Swivel

Zinc die casted to hold rods upto 16 mm, two rods can be fitted at any angle.

Bunsen Burner-Economy

This is one of most inexpensive option without flame stabilizer. The burner tube is made of brass and mounted on pressed steel powder coated base. Base dia is 80 mm, overall height of burner is 135 mm burner tube dia 12 mm. Suitable for LPG / Butane gas.

Bunsen Burner-Heavy Base,with stopcock

Burner has a heavy casted base giving stability to the burner. Nickel plated brass burner tube with rotatable air regulator and cylindrical riffled connector mounted on casted base. Base dia 75mm. For use with LPG/Butane
Burner Specifications: Tube Dia. - 12.5 mm, Height - 160 mm, Weight - 400 g.

Bunsen Burner-Heavy Base,without stopcock

Comprises of heavier casted base giving the stability to the burner. Total weight of the burner is about 350 g. Nickel plated brass burner tube with rotatable air regulator & cylindrical riffled connector, mounted on casted base. Burner tube 12.5 mm dia., base 75 mm dia., connector 10 mm o.d. For use with LPG / Butane gas.

Bunsen Burner-LPG

Burner Bunsen for LPG with pilot frame and needle valve control. Nickel plated tube 11 mm, inlet tube 10 mm dia, Base dia. 75 mm. Overall height 150 mm approx.

Bunsen Burner-Natural Gas

Burner Bunsen for natural gas with pilot frame and needle valve control

Burner-Meker,with stopcock

Meker burner is typically used where higher temperatures are required. The burner comprises of a perforated mesh plate on a nickel plated burner tube with a tapered bottom, mounted on casted base with riffled gas inlet tube 10 mm O.D., burner plate dia. 25 mm. Overall height 175mm base dia. 80 mm. WEight 680g approx.

Burrette Clamp-Double,Sheet Metal

To hold two burettes, sheet metal, die-pressed, with built-in boss head.

Burrette Clamp-Single,Sheet Metal

To hold single burette, sheet metal, die-pressed, with built-in boss head.

Clamp Retort,3 prong-Chrome Plated

PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm

Clamp Retort,3 prong-Powder Coated

PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm.

Clamp Retort,4 prong-Chrome Plated

Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at all angles of opening. The cork liners for the jaws are well secured. Overall length 25 cm.

Clamp Universal,Cork Lined

Cork lined jaws, which accepts articles upto 100 mm in diameter. Overall length 27 cm.

Clamp Universal,PVC Coated

PVC coated. Overall length 27 cm.

Cork Borer Set

Nickel-plated finish. Complete with cleaning rod having good grip and pipes of thick gauge. Set of 12 sizes 4-18mm

Crucible Tong-Stainless Steel

General purpose straight tongs, with corrugated jaws, used for handling of hot apparatus. Length 15cm or 20cm, Stainless Steel

Dissecting Set-14 instruments

Stainless steel, consisting of 14 instruments for accurate dissection.Complete in zipper leather case.Scissors 2 Nos.Forceps 2 Nos.Needles 4 Nos.Scalpel 1 No.B.P. Handle with Blade 1 No.Razor 1 No.Magnifying Glass 1 No.Chain and Hook 1 No.Blow Pipe 1 No.

Draining Rack-Metal,32 pegs

Size 16“ x 20”. 4 rows separated by 4”. All rows with 8 pegs. Each peg is 70 mm long

Draining Rack-Metal,Wall Mounted,28 pegs

Size 16“ x 12”. 5 rows separated by 3".2 rows with 5 pegs, 3 rows with 6 pegs. Each peg is 70 mm long

Draining Rack-Metal,Wall Mounted,48 pegs

Size 18” x 20”. 6 rows separated by 3". All rows with 8 pegs. Each peg is 70 mm long

E.S.R Westergreen Stand

Metal Stand for 6 Tubes

Hand Centriuge

A single speed hand driven machine consisting of a die casted parts and a steel pinion and worm drive. Screw clamps the machine to bench. Finished in grey colour with removable crank handle. Suitable for 4 x 15 ml polythene tubes.

Laboratory Jack,Mild Steel ,14X15cm Small

Strong, stable support for laboratory equipment. The jack has a screw operated scissor - action mechanism. Minimum height 60 mm Maximum elevation 25 cm. Finished in blue colour. Maximum Load 25 kg.

Laboratory Jack,Mild Steel,20X20cm

Strong, stable support for laboratory equipment. The jack has a screw operated scissor - action mechanism. Minimum height 60 mm Maximum elevation 25 cm. Finished in blue colour. Maximum Load 25 kg.Plate size 20x20cm.

Laboratory Jack-Stainess Steel

Stainless Steel Lab Jack
• Stainless Steel Plates
• Slip-Proof Rubber Feet
• Easy Going Movement
Available in 14x5cm, 20X20cm,25X25cm,30X30cm sizes

Retort Ring-Mild Steel

Plated mild steel with 8mm diameter stem.
I.D 5cm to 15cm

Retort Stand with Base & Rod-Extra Large

Set of Base Retort Stand with Stainless Steel Rod.
Base Size - 6 inch X 11 inch
Rod Length - 35.5 inch
Rod Dia - 0.5 inch

Retort Stand with Base & Rod-Large

Set of Base Retort Stand with Steel Rod.
Base Size - 6 inch X 9 inch
Rod Length - 24 inch
Rod Dia - 0.4 inch

Retort Stand with Base & Rod-Made of Cast Iron

Retort Stand
Material : Cast Iron & Hammer tone rod with L? Key

Retort Stand with Base & Rod-Medium

Set of Base Retort Stand with Steel Rod.
Base Size - 5 inch X 8 inch
Rod Length - 19.5 inch
Rod Dia - 0.4 inch

Screw Gauge,Micrometer,with lock

• Range: 0-25mm x 0.01mm
• Accuracy at 10mm is +/- .003mm
• Nickel plated brass with locking mechanism

Spare Clamp for Filteration Assembly

Spare Spare Clamp for Filteration Assembly (FSAS16) - 47 mm

Tong-Beaker

To hold 25-100ml cap., length 15cm.

Universal Clamp 2 prong double adjustable

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slipvinyl sleeve. The jaws are adjustable on both sides with thumbscrews. Have a large grip of about 55 mm. Overall Overall length 22 cm.

Universal Clamp 3 prong double adjustable

These clamps are used to hold irregularly shaped items. They provide firm grip to most commonly used glassware items in the labs. The jaws are adjustable on both sides with thumbscrews and are coated with non-slip vinyl sleeve. These clamps are available with rod or an integral bosshead (clamp holder) as well. These clamps can hold objects up to 58 mm. Overall length 22 cm.

Universal Clamp 2 prong single adjustable

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slip vinyl sleeve. Can hold objects of 12-45 mm dia.