Sales: sales@chemlabequipments.com,   Support: rajat.chemlabs@gmail.com
Sales: +919050603959,   Support: +917015039594

Thermo dynamics lab

Thermo dynamics lab:

Four Cylinder four stroke diesel engine

Product Details:
Current        : 5A, three pin socket with switch (2 No)
Water supply rate      :  : Continuous, clean and soft water supply @ 4000 LPH, at 10 m. head. Provide tap with 1 BSP size conn
Dimension (LxWxH)(mm)      : : 3500 x 4000 x 2000
Electric Supply        : 230 +/- 10 VAC, 50 Hz
Phase        : Single
Fuel Type        : Diesel
Fuel Capacity      :  : 10 liter, 3.5 liter
Exhaust pipe       : 32 NB
Size Pipe        : 1.25 Inch

Four Cylinder four stroke petrol engine

DESCRIPTION:

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.
EXPERIMENTATION :
• To determine specific fuel consumption.
• To determine Brake Horse Power.
• To determine Brake Thermal Efficiency.
• To determine mechanical efficiency.
• To determine indicated thermal efficiency.
• Morse Test.

UTILITIES REQUIRED :
Electric Supply: Single Phase, 220 V, 10Amp.
Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling
Fuel : 20 Ltrs. (Petrol)
Floor Area : 3m X 2m
Battery Unit : 12 Volt 88 Amp

Seperating & Throttling Calorimeter with boiler

We are engaged in offering qualitative range of Separating & Throttling Calorimeter with Boiler to study the Dryness fraction of Steam. The apparatus comes with an electric boiler, separating calorimeter, throttling calorimeter and a steam condensing system. The temperature of the steam can be controlled in the boiler with pre-installed temperature controller. The steam made in the boiler pass the separating calorimeter first and then reached to throttling calorimeter through a throttling device. When the steam is condensed, the amount of water separated is measured through measuring jars. temperature & pressure of steam at different points can be calculated in a precise manner with this apparatus.

Single Cylinder four stroke diesel engine

Water supply : Continuous clean and soft water supply @1000 LPH, at the minimum head of 20 m. is needed Provide ta
Exhaust line : Provide exhaust pipe 32 NB (1.25") size with suitable length.
Electric supply : 230 +/- 10 VAC
Phase: 1
Frequency: 50 Hz
Dimension (Lx W x H)(mm) : 3800 x 2500 x1700
Diesel oil: 10 liter
Lubricating oil : 5 liter
Drain : Provide drain pipe 1.5 Inch BSP size with suitable length.

Single Cylinder four stroke petrol engine

DESCRIPTION:
IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.
EXPERIMENTATION:
• To determine specific fuel consumption
• To determine Brake Horse Power
• To determine Brake Thermal Efficiency
UTILITIES REQUIRED :
Petrol : 5 liters
Water Supply: Continuous water flow of 10LPM at ½ kg/cm2 pressure if Calorimeter is ordered.
Power Supply : 230V AC, 5 Amp socket with earth
Floor Space : 2m x 1 m

Twin Cylinder Four Stroke Diesel Engine

Type of Engine : Twin cylinder, four strokes, vertical water cooled, crank start
Floor Area: 3 m x 2 m
Engine Oil :Multigrade 20W40
Tachometer :For RPM measurement
Fuel :10 Liter Diesel
Electricity Supply :Single Phase, 5-15 amp
Voltage :220V AC
Frequency: 50 Hz
Temperature Sensors :Thermocouple (6 nos.)
Type of Loading: Rope Brake Dynamometer
Air Intake Measuring System :Air tank fitted with orifice and water manometer
Temperature Measurement :Digital Temperature Indicator with multi-channel switch
Instruction Manual :An English instruction manual will be provided along
Torque Measurement :By Load Cell and Load Indicator
Fuel Measuring System: Fuel measuring system consists of a fuel tank, a burette